garage door phoenix arizona

If your garage door in Phoenix, Arizona isn’t working properly, it can be a real pain. You may not be able to get your car out of the garage, or you may have to enter and exit your home through the garage every time. Either way, it’s important to know how to adjust a garage door so that it works correctly. By following these simple steps, you can keep your garage door in good working order.

Take All the Safety Measures

Make sure you can fix your garage door by taking all possible safety precautions before you start.

First, you should always turn off the power before messing with the door’s wiring. Depending on the type of door you have, you may need to turn off the power at the source or in the door’s motor (your fuses).

You should have a strong, stable, and the right-sized ladder. It is especially important if you need to fix a commercial or industrial door, since these doors are much bigger. Most likely, you’ll need to use a ladder with an extension to get the job done.

Identify the Problem

As a first step, move the garage door up and down several times (ideally by hand to get a better feel for it, but this isn’t always possible) to see where it moves faster and where it stays still.

If you do notice that something is wrong, it’s likely that your garage door in Phoenix, AZ  isn’t even, and you’ll need to balance it. In that case, you need to measure the right way. You will need to know where the gaps are or how big the shaft at the top of the door and the drums on either side of the door are.

Problems with the wires that operate the garage door are one of the most frequent reasons why garage doors go out of balance. A cable may get so worn out over time that it begins to fray and droop; moreover, a cable may simply slide from the cable drum. This may happen as a result of normal wear and tear.

But if this is the case, you will probably need to call a professional because replacing or resetting cables involves working with electricity, which can be dangerous for someone who hasn’t done it before.

If your garage door is making noise when it opens or closes, it may need to be adjusted.

At some point in time, noises from your garage door opening and closing can be a real nuisance. If it comes to a point where the sound is unbearable, chances are that you need to adjust your garage door. Thankfully, this isn’t as difficult of a task as one may imagine. By simply adjusting the rollers and hinges, you can reduce the noise that is occurring. It will also strengthens the overall construction of your door in order ensure its durability and longevity. However, if you find that it doesn’t help the noise at all then it may be time to have a service technician look over it and determine how intense the repair needs to be.

First, check the tracks to see if there is any debris that could be causing the noise.

Before you attempt to adjust your garage door yourself, first check the tracks for any debris that could be causing the noise. Cleaning away dirt, dust, or pebbles can reduce the unsightly grinding noise and ensure a smoother garage door operation when it’s opened and closed. Also make sure that the garage door rollers and hinges are in good shape as well as all springs, screws, and bolts are tight before attempting any garage door adjustment at home.

If the tracks are clear, then you will need to adjust the springs.

It is important to adjust garage door springs if the tracks are clear. If you are looking to do it yourself, begin by measuring the garage door— this will help you to understand the specific garage door adjustment needed. Additionally, make sure that you purchase garage-specific parts and accessories as any old hardware can cause damage and/or malfunctioning of your garage door machinery. If done carefully, following instructions from reputable websites and manuals, a garage door spring adjustment can be completed in no time; however, be careful when doing so as serious injury or even death may occur due to improper procedures or lack of experience.

To adjust the springs, you will need to loosen or tighten them depending on which way the door is moving.

Adjusting a garage door spring can be an intimidating task for the average homeowner, especially when it is late and the door won’t close. But with the right tools, you can learn how to make the adjustment with ease. When adjusting the springs, what you will want to do is loosen or tighten them depending on how the door is moving; whether it’s not going all the way up or not latching at the bottom when closed. Remember – if there is any portion of this process that feels uncomfortable, call a professional!

Once you have adjusted the springs, test the door to see if it is still making noise.

Once you think you’ve adjusted the springs on your garage door, test it out to make sure that it is operating as smoothly and quietly as possible. Nothing is worse than having a door that makes lots of noise when opening or closing, and adjusting the springs is one of the simpler how-tos when it comes to making sure that your garage door functions properly. Follow the steps necessary for how to adjust a garage door spring, and then perform this simple sound test to guarantee your peace of mind and a reduction in any unnecessary noises. You deserve a quiet, soothing space; don’t let your noisy garage door keep you up at night!

If the door is still making noise, then you may need to replace the rollers or hinges.

Do your garage doors keep screeching no matter how much WD-40 you spray? It may be time to look at changing out the rollers or hinges of your garage door. Making adjustments can go a long way in how well your door operates and how much noise it makes! If you know how to adjust a garage door, it’s fairly easy to replace the rollers and hinges in order to maintain silent operation. If you’re not sure how to do this, always consult with a professional who can help you make an informed decision.

So, those are the steps you can take to adjust your garage door if it’s making noise. We hope you found this helpful. 

Need Additional Help? Our Team is Here for You

The garage door company Acclaim Garage Doors in Phoenix, Arizona offers a diverse selection of insulated garage doors for customers to pick from. Because our doors are available in such a wide variety of colors, designs, and degrees of insulation, we are certain that you will be able to discover one that is suitable for your unique preferences. We are a registered Clopay® dealer in addition to being an authorized retailer of market-leading brands such as ProVia, LiftMaster®, and Genie®.

If you reside in or around Phoenix, Arizona, and are in need of any garage door services, Acclaim Garage Doors is the place to go. In addition to selling high-quality garage doors, we also install, repair, and even paint them for our customers. This ensures that your new door will be a seamless addition to the aesthetic of the rest of your home.

You may reach out to us online or give us a call at (602) 699 5012 if you have any inquiries on the items that we sell, and a member of our knowledgeable team will be pleased to assist you. You may also visit our showroom, where we can assist you in selecting a door that is suitable for your requirements as well as your financial constraints.

Contact a local Garage Door Contractor in Arizona if you are still experiencing issues with your garage door or if you would prefer have a trained expert take care of the repairs.